6091 - 90° FEMALE - SWEPT TUBE
PTFE (TEFLON) SPECIFIC
600 Series fittings are compatiable with the 600 series hose, most commonly used for fuel installations travelling through the cockpit. Alike the 236 Fittings, the 600 Series Fittings are available in the traditional Blue and Red Anodised Aluminium finish or for that classic OEM Apearance, select are also available in Black Anodised Aluminium making these fittings and hose an invaluable part of your fuel or oil system. Smoothbore PTFE (Teflon) hose assemblies can provide the most economic, efficient and lightweight solution to Fuel and Oil transfer systems.
CONSTRUCTION
- Suitable for Smoothbore Teflon (PTFE) Hosing Only**
- 600 Series Hose Ends allow for all time alignment with their 360-degree swivel ends
- They are available in bright anodised red and blue
- Each fiting contains an Olive which must be fitted between the Steel Braid and the Teflon Lining so it can be compressed by the socket:
Replacement Sockets & Olives
APPLICATIONS
COMPATIABLE HOSING
6091 - PART NUMBERS
SMOOTHBORE PTFE HOSE ASSEBMLIES:
A PTFE Compatiable fitting can be indetifed by a Flared Socket which also contains an Aluminium Olive. Identical to the Brake and Clutch lines assembly, the fitter must place the olive between the PTFE lining and the outer stainless steel braid, so when the socket is tightened, the olive compresses the hose to create a very effective seal suitable for high pressure fuel and oil. The compressed olive ensures that the assmebly is vapour free making it suitable for the interior cockpit of a car.
These fittings are reusable so that they can be used time and time again but will require replacement olives. If the hose itself is damaged, just disassemble, clean, lubricate and reassemble with a new olive and a new piece of hose.
