CP5596 - FLOOR MOUNTED PEDAL BOX Complete with Master Cylinders
REVERSE PULL TYPE
This bundle offers world class performance at an unbeatable price. The AP Floor Mounted Reverse Pull Type pedal box, combined with AP Racing Trunnion Mounted Master Cylinders offers optimum control and comfort, both machined from an aluminium alloy material allowing for significant weight saving.
This box is designed for the Master Cylinders to be mounted under the drivers' feet allowing the pedal box to be pushed right up to the bulkhead of the car, in turn creating more legroom for the driver. The concept of Pull Type Cylinders ensures that the bore of the cylinders is pulled straight out of the body of the master cylinder when the pedal is pressed, whereas the standard Push Type cylinders would have the tendency to travel at an incline.
CP5596 - FLOOR MOUNTED PEDAL BOX
Reverse Pull Type
This unique pull-type design allows the load through the cylinders to remain straight during operation, which eliminates side loads that you see in a push-type cylinder, thus making CP5596 the most efficient fixed floor-mounted pedal box on the market.
The cylinders are mounted under the driver's feet for optimum space utilisation and access.
Minimi hysteresis and balance variation are assured by the use of the needle roller bearings in the centre trunnion.
CP5596 supersedes but does not replace CP5516 assemblies, but offers improved strength, and installation qualities.
FEATURES
- Lightweight Aluminium base, machined from solid billet.
- Weight - 3.9kg (without cylinders)
- All pedals are machined from aluminium forgings.
- Pedals are pivoted by ball bearings to increase smoothness.
- Designed for use with CP6465 master cylinders
- Adjustable footpads for extra driver comfort.
- Adjustable clutch & throttle pedal stop
- Brake pedal ratio 4.10:1 to 5.00:1
- Clutch pedal ratio 4.55:1
- Dual mountings for throttle potentiometers. Inboard mounting and sensor available in a separate kit
- All threads are metric
- Brake bias adjuster cable CP2905-18 included with assembly
CP6465 - PULL TYPE MASTER CYLINDER
TRUNNION MOUNTED
The ultimate in master cylinder efficiency over traditional cylinder designs. This cylinder operates on the pull rather than push principle of other cylinders.
It has a built in trunnion mounted in needle roller bearings for direct mounting to the balance bar.
FEATURES:
- Hard Anodised Aluminium Alloy Body
- Low profile inlet and outlet
- Extra short travel to cut-off
- 10 Available bore sizes
- Outlet hydraulic threads are metric
- Use with CP5520-2, 3 or 4 Trunnion type balance bar or purpose designed pedal box.
- Rubber boots fitted as standard
TECHNICAL DETAILS:
