FIA Seat Mounting Kit
Universal Weld In Seat Rail Mounting / Subframe Kit - FIA and MSA / MSUK approved type.
Kit manufactured as per FIA drawings - please see attached documents.
Technical Specifications:
- Ø35mm Seamless tubes ready to be drilled to suit your seat mounts.
- Counter-plates supplied with pre-welded nuts.
- Welds to Inner Sills and Gearbox Tunnel.
- M8 threaded inserts
- End plates welds to tube ends; can be bolted or welded into position between counter plates.
- Meets FIA APPENDIX J ARTICLE 253/A16.2 and MSUK K2.2.2/DRAWING K64
- Kit supplied loose for DIY Assembly.
Included in the Kit:
- 2x 35mm Diameter x 600mm long CDS tubes.
- 4x Weld on tube saddles.
- 4x Weld on inner sill / tunnel plates with pre-welded nuts.
- 4x Tube End Plates.
- 4x M8 Threaded Inserts.
Optional Tools:
- GRP5094 - Drill JIG for Drilling Seat Mounts - 14mm
Motorsport UK - Seat Installation Guide
**Sold per Seat