0L06-EL-LNR
0L06-EL-LNR - ISO
0L06-EL-LNR - Rear
0L06-EL-LNR - Mounting
0L06-EL-LNR - Drawing
0L06-EL-LNR - Photometric
0L06-EL-LNR - Info
0L06-EL-LNR - Range
0L06-EL-LNR
0L06-EL-LNR - ISO
0L06-EL-LNR - Rear
0L06-EL-LNR - Mounting
0L06-EL-LNR - Drawing
0L06-EL-LNR - Photometric
0L06-EL-LNR - Info
0L06-EL-LNR - Range
Lazer Lamps

Linear-6 Elite

0L06-EL-LNR

  • LENGTH: 232MM / 9.1"
  • 4050 LUMENS
  • LOW PROFILE DESIGN
  • Elite Grade

£195.00

LINEAR-6 Elite

Elite level boasts twice the light output compared to the equivalent Standard version.

Representing the very best in slimline auxiliary high beam driving lights, the Linear range utilises a combination of highly efficient 3W LEDs and vacuum-metallised wide optics to deliver a perfectly tuned beam pattern for everyday road use. Measuring just 40mm in height, the Linear range is an excellent solution when either space is limited or when looking for a discreet installation that’s most likely to get noticed at night-time.

Linear products are especially well-suited to roof mount installations where the sleek, aero design of the aluminum housing eliminates nearly all wind noise, and the comparatively low up/down spread of light ensures no glare off the vehicle bonnet.

What's included:

  • x1 Linear-6 Elite LED Lamp
  • x1 Anti-Theft Side Mount (1127k)
  • x1 Installation Instructions

PRODUCT FEATURES

  • Combination of highly efficient 3W ‘premium bin’ LEDs

  • 5000K LED colour temperature and 80CRI maximises sharpness and definition

  • Vacuum-metallised optics deliver wide spread of light

  • Reduced up/down spread of light suits even low mounting positions, or roof mounting

  • Sleek, low profile design eases installation

  • Aero design virtually eliminates wind noise on roof installations

  • Flexible mounting options – anti-theft side mounting brackets included

  • Electronic thermal management system optimises light output to preserve longevity of the LEDs

  • Anodised pre-treatment and automotive grade powder top-coat for ultimate corrosion and chemical protection

  • CAE optimised heatsink offers improved thermal dynamics

  • Over voltage protected

  • Reverse polarity protected

  • ‘Unbreakable’ polycarbonate lens with hardcoat lacquer

  • UNECE approved Reg 112 (Class B Driving Light) for on-road high beam function

  • UNECE approved Reg 10

  • IP67 watertight

  • 5 year warranty

  • Supplied with pre-wired male/female 2-pin Superseal connectors

  • Designed and manufactured in UK

Linear-6 Elite Technical Specifications

Voltage Range (DC) 10-32V
LED Life 50,000 hours
Weight 495 gr

HIGH BEAM FUNCTION

 
Total Luminous Flux 4050 Lm
Total Driver 'FOV' Flux † 2884 Lm
Colour Temperature 5000K
Number of High Output LEDs 12
Power Consumption 42 Watts
Current Draw (at 14.4V) 2.9 Amps
Start-up Time * 100ms

CERTIFICATION

 
High Beam ECE R112
ECE Reference 17.5
DIMENSIONS  
Width 232 mm
Depth 62 mm
Height 40 mm

PHOTOMETRIC DATA

 
Horizontal Beam Angle 42 degrees
0.25 lx Line 563 metres
0.5 lx Line 398 metres
1 lx Line 282 metres
3 lx Line 163 metres

* 'Start-up time' is the delay between the lamp receiving voltage, and light being emitted. Different Lazer lamps have different start-up times, depending on their electrical architecture, so we recommend that if you are buying two different types of Lazer lamp, for mounting on to the same vehicle, that you ensure you pick products with matching start-up time (either 5ms or 100ms, depending on the product). Please check the lamps technical section on each product page to be sure you are purchasing lights with the same start-up time for the best performance.