Motul MotylGear SAE 75W-90
Racing gearbox and differential lubricant
TECHNOSYNTHESE based
TYPE OF USE
Specially recommended for gearboxes which are hard to shift and/or noisy gearboxes. All mechanical transmissions, synchronised or non-synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoid differentials without limited slip systems, operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.
PERFORMANCES
STANDARDS - API GL4 & GL5 / MIL-L-2105D
- Synthetic Technosynthese® “Extreme Pressure” lubricant for an efficient anti-wear protection reinforced with synthesis base stocks for a better resistance at high temperature and longer lifetime.
- Stays in viscosity grade 90 after the KRL 20 hours shear test as requested by SAE J306 Standard.
- Very high lubricating power which decreases friction and wear.
- Viscosity grade 90 at high temperature to provide outstanding oil film resistance at high temperature and/or to reduce transmission noise.
- Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
- Less effort required on the gear lever to shift the gears for improved driving comfort.
- Suitable for any type of seal and yellow material used in gearboxes design.
- Anti-corrosion, Anti-foam.
RECOMMENDATIONS
Oil change: According to manufacturers' requirements and adjust according to your own use.
PROPERTIES
Viscosity grade |
SAE J 300 |
75W-90 |
Density at 20°C (68°F) |
ASTM D1298 |
0.855 |
Viscosity at 40°C (104°F) |
ASTM D445 |
114.1 mm²/s |
Viscosity at 100°C (212°F) |
ASTM D445 |
18.1 mm²/s |
Viscosity Index |
ASTM D2270 |
176.0 |
Pour point |
ASTM D97 |
-51.0 °C / -60.0 °F |
Flash point |
ASTM D92 |
199.0 °C / 390.0 °F |