NMB SPHERICAL BEARING
5/8" ID | 1.3/8" OD | 1.20" BW | 9/16 HW
TECHNICAL SPECIFICATIONS:
- Internal Diameter: 15.875mm | 5/8" | 0.625"
- Outside Diameter: 34.925mm | 1.3/8" | 1.375"
- BW (Bearing Ball Height): 30.48mm | 1.20"
- HW (Bearing Sleeve Height): 14.288mm | 9/16" | 0.5625"
- Material:
- Race - 440C Stainless Steel
- Ball - 410C Stainless Steel
- Bearing Type: Spherical
- Lubrication Type: PTFE (Polytetrafluoroethylene) Lined
- Retention Method: Circlip / Snap-ring
Our NMB ABYT Series Spherical Plain Bearings are high-performance, stainless steel, high-angle bearing.
WHERE IS THIS USED?
The car applications that ABYT10 Spherical Plain Bearings are directly used for:
- Formula 3
- Hill-Climb
- Time Trial
- F2/GP3
- Formula Ford
Please note: These are not suitable for Formula 1, LMP, WRC and Touring car applications – see “ABTE-Type” range of bearings for these applications.
SUSPENSION:
It can be used for other classes of Race cars to improve suspension and ultimately, track time.
Why ABYT10?
Its adaptable construction with a special reinforced enriched PTFE fabric liner sliding surface enables higher load capabilities, longer life, and lower friction under load than comparably sized bearings. The ultimate imperial high-angle series Spherical Plain Bearing for Motorsport and Racing applications.