LGBPPR0340 - Total Quartz INEO First 0w30
LGBPPR0340 - Total Quartz INEO First 0w30
Total

Total QUARTZ INEO First 0W30 Engine Oil - 5L

LGBPPR0340

  • ACEA C1 & C2
  • PSA Approval B71 2312 & B71 2302
  • For use with DS3 R3
  • DS3 R5
  • C3 R5
  • 208 R2
  • 208 Rally 4
  • 208 R5

£39.99

Was: £68.83

Total Quartz LogoINEO First 0W-30

Total Quartz INEO First 0W30 Key Data

Age Resistance TechnologyTotal Age Resistance technology

The next gen oil for outstanding protection.  Age-Resistance technology provides expert protection, to fight everyday challenges in the long term.  Age-Resistance technology offers unbeatable engine protection.  It's unique combination of hyperactive molecules creates a strong thick oil film on all concerned engine parts.  Engines are absolutely protected against a variety of challenges, from wear to oil oxidation even at extreme temperatures.

Applications

TOTAL QUARTZ INEO FIRST 0W-30 is used by PSA PEUGEOT CITROËN as first fill engine oil and is recommended by PEUGEOT, CITROËN and DS in after sales.  This pollution-control synthetic technology engine oil provides engines with the best possible protection against wear and clogging.  

The post-treatment systems, sensitive to the lubricants used and expensive to maintain, are also protected over the long-term thanks to the “Low SAPS” formulation (low content of sulphated ash, phosphorus and sulphur contents).

Using this engine oil can help generate fuel savings without the need to change driving style.

It is also suitable for the most demanding driving conditions (door-to-door, sports driving, repeated start-ups, city and motorway driving, etc.).

TOTAL QUARTZ INEO FIRST 0W-30 is particularly well-suited for use with recent engines of PSA, and particularly ones equipped with e-HDI using Stop & Start technologies, and hybrid engines which require new generation engine oils.

Customers Benefits

  • Reduced environmental impact: Fuel savings of 3,33% as measured by the official ACEA M111 FE test and savings above 4,2% as measured during the NEDC cycle compared with 5W-40 grade oil in compliance with the official ACEA test used for measuring CO2 emissions.  It guarantees compliance with all the levels of performance claimed by PEUGEOT, CITROËN and DS in relation to environmental standards.
  • Protection for pollution-control systems: This lubricant also optimises the way in which three-way catalytic converters and particulate filters operate, preventing them from getting clogged up with soot or sludge deposits.  This reduces particulate emissions, NOx, HC and CO in particular.
  • Engine protection and cleanliness: This oil offers the best possible protection in its category against wear and clogging as soon as the engine is started up.
  • Easier cold starts: The 0W-30 grade, together with special additives, makes cold engine starts easier, even at very low temperatures (validation tests carried out down to -40C).
  • Oil change intervals: TOTAL QUARTZ INEO FIRST 0W-30 retains all of its properties, in accordance with the service plans recommended by PEUGEOT, CITROËN and DS.

Characteristics

Total Quartz 0W30 INEO First Characteristics