Straight Banjo - Extended Neck

5092

Straight
Extended Neck

£10.23

* Select Hose Dash Size

* Select Bolt Hole Size to Suit

* Select Material

Overview

5092 - EXTENDED NECK BANJO
STRAIGHT

Goodridge Brake/Clutch Banjo Fittings to suit Goodridge -03 sized 600 Series brake hose. Each fitting is supplied with the necessary olive and socket to aide fitment to the Goodride Brake Hose.

Goodridge Banjo's available in a range Material and a range of Angles (Degrees) making it possible to fit to hard to access cylinders and pedal boxes.

CONSTRUCTION

Suitable for Smoothbore Teflon (PTFE) Hosing Only**
600 Series banjo's allow for all time alignment with swept angle.
They are available in various material types and Banjo Bolt hole sizes (See part numbers below)
Each fiting contains an Olive which must be fitted between the Steel Braid and the Teflon Lining so it can be compressed by the socket:

Assembly

REPLACEMENT SOCKETS & OLIVES

APPLICATIONS

Brake
Clutch

COMPATIABLE HOSING

5092 - PART NUMBERS

AP Racing reference: CP2672 = 5092-03P

5092

GOODRIDGE MATERIAL KEY:

B: Brass,
C: Stainless steel,
CH: Crome plated,
D: Anodised Aluminium,
P: Zinc plated carbon steel,
Z1: Silver plated carbon steel.

RECOMMENDED BANJO ASSEMBLE WITH BANJO BOLT:

With the suitable Banjo Bolt to Suit the desired Banjo Hole, place a copper washer either side of the Banjo to create a sealed fitment when tightened.

**Please note that the washers internal diameter must also match the Banjo Bolt size to ensure it is a sealed fitment to avoid leaks and loss of pressure.

Assembly

Details

SMOOTHBORE PTFE HOSE ASSEBMLIES:

A PTFE Compatiable fitting can be indetifed by a Flared Socket which also contains an Olive. Quite simply, the fitter must place the olive between the PTFE lining and the outer stainless steel braid, so when the socket is tightened, the olive compresses the hose to create a very effective seal suitable for high pressure fluids. The compressed olive ensures that the assmebly is vapour free making it suitable for the interior cockpit of a car.

These fittings are reusable so that they can be used time and time again but will require replacement olives. If the hose itself is damaged, just disassemble, clean, lubricate and reassemble with a new olive and a new piece of hose.

600 Fittings