CP6465 - Pull Type MASTER CYLINDER
Trunnion Mounted
The ultimate in master cylinder efficiency over traditional cylinder designs. This cylinder operates on the pull rather than push principle of other cylinders.
It has a built in trunnion mounted in needle roller bearings for direct mounting to the balance bar.
FEATURES:
- Hard Anodised Aluminium Alloy Body
- Low profile inlet and outlet
- Extra short travel to cut-off
- 10 Available bore sizes
- Outlet hydraulic threads are metric
- Use with CP5520-2, 3 or 4 Trunnion type balance bar or purpose designed pedal box.
- Rubber boots fitted as standard
TECHNICAL DETAILS
![CP6465 Technical Details CP6465 Technical Details](https://raceandrally.com/media/wysiwyg/AP_Racing/Master_cylinders/CP6465_Technical_Information.png)
CP6465 PART NUMBERING
![CP6465 - Part Numbers CP6465 - Part Numbers](https://raceandrally.com/media/wysiwyg/AP_Racing/Master_cylinders/CP6465_Part_Numbers.png)
INSTALLATION DRAWING
![CP6465 - Drawings CP6465 - Drawings](https://raceandrally.com/media/wysiwyg/AP_Racing/Master_cylinders/CP6465_Drawing.png)
REPAIR KITS
Each repair kit is in accordance to Bore Diameter of Master Cylinder: