G-Line Series

G-Line hose and fittings are used by leading motorsport teams requiring a combination of high flow rate, protection from the elements, tight bend radii and reduced weight. The G-Line hose range is available in smoothbore with an anti-static PTFE liner. In addition, bespoke lightweight aluminium fittings, available in crimp and reusable tail options. Double swivel tail options are available to aid with alignment.  Current customers include teams competing in F1, INDYCAR, WEC, NASCAR, WRC, GT, BTCC and WTCR.

Benefits

 - Super light weight
 - Uninterrupted flow 
 - Burst pressure up to 5076 PSI / 350 BAR
 - Temperature resistance from -70°C to +260°C
 - Bend radius to 20mm

Features

 - High flow rate (XF910 & XF811)
 - PTFE lined
 - Aramid fibre / Stainless steel braided options
 - Compatible with crimp & reusable fittings
 - SAE J7137 compliant

SAFE FOR USE 'IN COCKPIT'


Frequently Asked Questions

What applications can the G-Line Series be used on?

The G-Line XF910 and 811 series range of fittings and hosing can be used on the following applications:
- Oil
- Water
- Coolant
- Methanol
- Fuel (Suitable for use 'IN COCKPIT')
- Air

Which hose do I need?

Goodridge G-Line Series consists of five hoses to choose from; 811, XF 910, 910 FC, 710 and 711 series. Check the comparison chart below:

 Hose Series 710 711 811 910 910 FC
Fititng Type Draw Swage
only		 Crimp
Only		 Reusable
&
Crimp		 Reusable
&
Crimp		 Crimp
Only
Burst Pressure
X X
High Flow Rate
X X
Bend Radius X



Additional External Protection

X

Temperature Resistance

X

Lightweight
X
X X

 

What fittings can I use?

The different fitting and hose combinations possible are outlined in the table below:

Hose Type
 Fitting Type 910 811 710 711
711 Series
Crimp Only



811 Series
Reusable



4000 Series
Crimp Only




Can the hose and fitting assemblies be built easily?

For assemblies using 811 series reusable fittings, yes. These can be assemblied easily using basic handtools following instructions outlined below. We recommend to use the Goodridge Aluminium spanners on all Aluminium fittings.

For all other hoses using crimp fittings from the 711 & 4000 series, these must be assembled using specialst tooling by an Authorised Goodridge G-Tech Centre. Race and Rally is the only Goodridge G-Tech centre in Ireland.

STEP 1 STEP 2 STEP 3
Remove socket from fititng and ensure the hose has clean square cut ends. Feed the hose into the socket with a turning motion, feeding the braid in as you turn the hose. Hold the fitting in a vice with smooth or soft jaws, and lubricate the threads with a light oil.
STEP 4 STEP 5 STEP 6
Push the hose firmly onto the thread whilst rotating the hose and socket together. Hand tighten both the hose and socket until it becomes too tight to move. Finish tightening the socket using an aluminium spanner, continue turning the socket until it reaches the base of the thread. When the socket reaches the base of the thread, keep turning for an extra 1.5 complete turns.