Stand 21 HANS Devices
A frontal head restraint (FHR), commonly known as a HANS device, connects your helmet to your harness to reduce head and neck movement in a heavy impact. Stand 21’s Club Series devices are traditional collar-style FHRs, designed for competitors in saloon and rally cars and handmade in France. If you’d prefer an alternative to a collar-style device, see our hybrid devices. Here’s what to look for:
- FIA 8858-2010 approval on both models, with the Club Series 3 also SFI 38.1 certified
- 20° angle, suited to the more upright seating position in saloon and rally cars
- Carbon-reinforced construction, made from thermoplastic injected resin reinforced with carbon fibre
- Sliding tethers for better head mobility without compromising safety
- Shoulder padding and harness stabilising clips included, so the device is ready to use out of the box
Club Series vs Club Series 3
Both are FIA 8858-2010 approved 20° devices with standard PA HANS sliding tethers. The difference comes down to weight and approval: the Club Series 3 is lighter, at 640g bare (approx. 749g with padding and tethers) against the Club Series’ 830g (approx. 950g), and it’s also SFI 38.1 certified.
Both are available in two sizes:
- Medium: neck circumference 38 to 45.5cm (15 to 18")
- Large: neck circumference 45.5cm and above (18"+)
Fitting Your Stand 21 HANS Device
Both devices include stabilising clips that stop the harness shoulder straps moving on the device, which is key to keeping the restraint working as it should. The clips are designed for 2-inch harness shoulder straps, so check your harness before ordering. If you’re upgrading your harness at the same time, see our harnesses with 2-inch shoulder straps.
Your helmet also needs FHR posts fitted to connect the tethers. Many of the helmets we stock come with posts fitted as standard.
Frequently Asked Questions
Is a 20° HANS device right for my car?
Stand 21’s 20° devices are designed for upright seating positions, such as saloon and rally cars. If you sit in a more reclined position, check the angle you need with your seat supplier, and see our full head and neck safety range for other options.
Can I use a Stand 21 HANS device with an open-face helmet?
Yes. Stand 21 FHR devices can be used with open-face helmets, as long as the helmet has FHR posts fitted to connect the tethers.
Which size do I need?
Measure around your neck with a soft tape and match it to the size guide above. If you’re on the boundary at 45.5cm (18"), Large is the size that starts there, but it’s worth getting in touch before ordering if you’re unsure.