CP6465 - Trunnion Mounted Master Cylinder
[Pull Type]

The ultimate in master cylinder efficiency over traditional cylidner designs. This is due to the compact nature, there is less chance of unwanted side loading

This cylinder operates on the pull rather than push principle of other cylinders. It has a build in trunnion mounted in needle roller bearings for direct mounting to the balance bar.

Features:

• Hard anodised Aluminium Alloy Body
• Low profile inlet and outlet
• Extra short travel to cut-off
• 10 available bore sizes
  
• Hydraulic threads are metric
• M8 x 1.25 Pushrods
• Use with CP5520-2, CP5520-3 or CP5520-4 Trunnion type balance bar or purpose designed pedal box (CP5596)
• Rubber boots fitted as standard

Master Cylinder Identification:

All AP Racing master cylinders have their part number nominal bore size laser marked on the body together with batch codes enabling full manufacturing traceability.  All master cylinders also have a coloured tie wrapped around the body for quick visual identification of bore size.

Technical Details:

CP6465 Part Numbering

CP6465 Reference Dimensions Details

Optimum pull type cylinder design means that to use standard seal size and bore sizes, there would be a slight variation from standard cylinders. The sizes were also adjusted to give equal steps between the different sizes.

The table below shows the master cylinder part numbers and a bore size that would reflect a push type cylinder, the corrected bore size. The part number also reflects the cylinder size.

Installation Drawing

Spare Parts

Additional Parts

Description	Part Number	Image
Special Inlet Fittings	Designed to suit Goodridge 910 Series hose. Contact us for custom hose assembly from our Goodridge G-Tech Centre
- Straight	CP6465-11
- 75° Angle	CP6465-10
- 90° Angle	CP6465-12
Ø5/16" EPDM Hose
- 12" Length	CP6614-103
- 24" Length	CP6614-106
- 72" Length	CP6614-102